BioGuard Scale Inhibitor

Home » Supplies » Water Balancers » BioGuard Scale Inhibitor

BIOGUARD SCALE INHIBITOR

BioGuard Scale Inhibitor: prevents scale build-up and metal stains without harming pool equipment and surfaces.

BioGuard Scale Inhibitor

BioGuard Scale Inhibitor prevents scale build-up from high calcium levels. It also prevents stains caused by iron, copper and manganese. Regular use of this new concentrated formula prevents scale build-up on pool surfaces, piping, filtration, and heating elements. This product will not affect pH. Scale Inhibitor will continue working 3-4 weeks after application (way longer than the neighbor kid you hired to mow the lawn).

Use With:

Product Information

  • pH <3.0
  • Prevents and removes metal stains and scale from pool surfaces
  • Protects pool equipment from scale and metal stains
  • Prevents cloudy water due to high calcium levels
  • For chlorine or bromine treated pools

How to Use BioGuard Scale Inhibitor

Read the entire label and use strictly in accordance with precautionary statements and directions.

INITIAL TREATMENT

Clean or backwash filter following manufacturer’s directions. With the pump running add 1 quart of this product per 10,000 gallons of water, pouring product directly into the pool. Continue to run pump for 24 to 48 hours after this addition.

MAINTENANCE TREATMENT

For the maintenance dose, apply 16 fl oz of this product per 10,000 gallons of pool water once a month. Add product directly to pool water with pump on. Maintenance doses should be used for pools in areas where excessive hardness or metals cause constant scale and staining problems.

REMOVAL OF FRESH STAINS

Many fresh (less than 5 days old) metallic stains can be removed by this product. Add this product at the rate of 1 quart per 10,000 gallons of water. Apply directly to the pool in the area of the stains. Brush the stained area daily for 3 to 5 days. Large metal stains may require repeat treatments. Where metal stains have aged into the pool’s surface, draining and acid washing is recommended for white plaster pools only. Consult your BioGuard dealer regarding this matter.

Related Products

BioGuard Erase Iron Stain Remover: combats iron-based stains on virtually all pool surfaces including plaster, tile, and vinyl.

BioGuard Erase Iron Stain Remover

BioGuard Erase Iron Stain Remover is specifically formulated to combat iron-based stains, restoring your pool surfaces to their former beauty.

BioGuard Sparkle Up: cellulose filter aid intended to be used on tiny particles like pollen, dirt, plaster, algae, and more.

BioGuard Sparkle Up

BioGuard Sparkle Up is a cellulose filter aid intended to be used when your filter experiences difficulty in filtering very small particles.

BioGuard Pool Magnet Plus: prevents staining due to iron, copper and manganese as well as water discloration from metals.

BioGuard Pool Magnet Plus

BioGuard Pool Magnet Plus prevents staining due to iron, copper and manganese. It also eliminates discolored water from metals.