BIOGUARD BALANCE PAK 300
BioGuard Balance Pak 300
BioGuard Balance Pak 300 is a calcium hardness increaser. This product boosts calcium hardness to help prevent equipment corrosion, etching of plaster and wrinkling of liners. It has a unique palletized formulation which means faster dissolving and less cloudiness.
Use With:
-
- In-Ground Pools
-
- Above Ground Pools
Product Information
- Granular calcium chloride
- For raising calcium hardness
- Inhibits corrosion of pool equipment and surfaces
Product Resources
Water Chemistry Tips + Cheat Sheet
Learn basic pool care maintenance and water balancing. Read It
How to Use BioGuard Balance Pak 300
Read the entire label and use strictly in accordance with precautionary statements and directions.
Calcium hardness in pool water should be maintained in the 175-275 ppm range. Never allow calcium hardness to remain below 100 ppm. Add this product directly to pool water by scattering it over the water surface. Do not pre-dissolve this treatment as heat is generated when this product contacts water. Use a surface compatible brush to brush any undissolved granules off pool surfaces. The addition of 4 lb of this product per 10,000 gallons of water will raise calcium hardness approximately 40 ppm. The addition of 10 lb of this product per 10,000 gallons of water will raise calcium hardness approximately 100 ppm.
Related Products
BioGuard Balance Pak 100
BioGuard Balance Pak 100 is used to raise total alkalinity. Maintaining proper total alkalinity prevents pH from bouncing due to rain, bather load, and other chemical applications.
BioGuard Balance Pak 200
BioGuard Balance Pak 200 raises pH in pool water.
BioGuard Instant Stabilizer 100
BioGuard Instant Stabilizer 100 is a quick dissolving formula that prevents the flood of free chlorine due to sunlight.