BIOGUARD BALANCE PAK 100
BioGuard Balance Pak 100
BioGuard Balance Pak 100 is used to raise total alkalinity. Maintaining proper total alkalinity prevents pH from bouncing due to rain, bather load, and other chemical applications. Low alkalinity may also cause pool water to be corrosive to the metal and plastic with which it comes in contact. This product is proven to help prevent pool staining, plaster etching or liner wrinkling. The contents of Balance Pak 100 dissolve quickly when added directly to water.
Use With:
-
- In-Ground Pools
-
- Above Ground Pools
Product Information
- Sodium Hydrogen Carbonate: 100%
- For raising total alkalinity
Product Resources
How to Adjust Alkalinity
Learn how to raise and lower Alkalinity in your pool and learn what causes it to change. Read It
How to Use BioGuard Balance Pak 100
Read entire label and use strictly in accordance with directions and precautionary statements.
Total alkalinity in pool water should be maintained in the range of 125-150 ppm. For pools using Mineral Springs or pools equipped with chlorine generators total alkalinity should be 80-150 ppm. Add directly to pool water with pump and filter running. 1.5 lb of this product per 10,000 gallons of water will raise total alkalinity 10 parts per million (ppm). Refer to addition chart below to determine amount needed to correctly balance pool water. Large additions should be divided into thirds and added every 6 hours
Related Products
BioGuard Balance Pak 200
BioGuard Balance Pak 200 raises pH in pool water.
BioGuard Balance Pak 300
BioGuard Balance Pak 300 is a calcium hardness increaser.
BioGuard Instant Stabilizer 100
BioGuard Instant Stabilizer 100 is a quick dissolving formula that prevents the flood of free chlorine due to sunlight.