BIOGUARD SALTSCAPES PH REDUCER
BioGuard SaltScapes pH Reducer
BioGuard SaltScapes pH Reducer helps to lower ph and total alkalinity levels in salt water pools. As your chlorine generator converts salt into chlorine it also naturally raises your pool’s pH level.
Use With:
-
- In-Ground Pools
-
- Above Ground Pools
Product Information
- 93.2% sodium bisulfate
- Lowers pH
- Protects surfaces and equipment
- Easier to store and handle than muriatic acid
- Helps ensure optimal swimmer comfort
- Quick dissolving
Product Resources
- How to Use the BioGuard SaltScapes Program
Learn how to get started on the BioGuard SaltScapes Program in 5 easy steps plus maintenance tips. Read It
How to Use BioGuard SaltScapes pH Reducer
TEST AND BALANCE
Test pH weekly and maintain pH between 7.2–7.6
DOSAGE
Never add more than 1.5 lb per 10,000 gallons at one time. DO NOT allow undissolved product to remain on the pool surface. Brush undissolved product to avoid discoloration.
DIRECTIONS
Broadcast product into the deep end while pool is not in use and pump is running.
FOR BEST RESULTS
Allow the pool to circulate for two hours then retest pH. Add more product if needed. Brush any undissolved clumps off surface of pool to avoid bleaching.
RE-ENTRY
Test water and enter the pool when pH has reached ideal 7.2–7.6 range.
Related Products
BioGuard SaltScapes Algae Remover
BioGuard SaltScapes Algae Remover is a highly effective, non-staining algaecide for swimming pools.
BioGuard SaltScapes SunShield Stabilizer
BioGuard SaltScapes SunShield Stabilizer protects the chlorine in your pool from being degraded by sunlight.
BioGuard SaltScapes Scale Defender
BioGuard SaltScapes Scale Defender prevents the calcium in your pool water from collecting on your pool equipment.