BioGuard SoftSwim C

Home » Supplies » Non-Chlorine Products » BioGuard SoftSwim C

BIOGUARD SOFTSWIM C

BioGuard SoftSwim C: part of the "A-B-C" system - powerful clarifier and oxidizer that removes contaminants that can cause cloudiness.

BioGuard SoftSwim C

BioGuard SoftSwim C is a powerful clarifier and oxidizer that helps keep the sparkle in your water longer by removing contaminants that can cause cloudiness. It is step 3 of the SoftSwim program.

This product is formulated to last 30% longer in the water – a real money saver. It clears pool water by eliminating body oils, perspiration, and other undesirable contaminants that can affect clarity and sparkle.

SoftSwim C has a built-in stabilizer to ensure that the dual action chemicals won’t burn off easily in hot weather.

Use With:

Product Information

  • 27.5% Hydrogen Peroxide
  • pH 3.0
  • Patented ClearGuard stabilizer
  • Powerful oxidizer
  • Enhances water clarity
  • Effectively oxidizes organic waste

How to Use BioGuard SoftSwim C

Read entire label and use strictly in accordance with hazard statements and directions. Consult your BioGuard Dealer for advice on water testing and proper water balance before beginning the SoftSwim program.

SPRING START-UP

Before opening your pool for the season, take a sample of your pool water to your BioGuard Dealer for a complete water analysis. Once your pool water has been properly balanced, add SoftSwim Algicide A according to label directions. Add one gallon of improved SoftSwim C Clarifier per 10,000 gallons of pool water. Allow the water to circulate for 24 hours. Then adjust the SoftSwim B to 50 ppm. Resume routine maintenance as instructed by the SoftSwim Pool Care Guide.

ROUTINE MAINTENANCE

Once each month, add SoftSwim C Clarifier at a rate of one gallon per 10,000 gallons of pool water to maintain sparkling clear water. With the filter operating, pour SoftSwim C Clarifier directly into the water in several areas around the pool. Allow the treatment to circulate throughout the pool for at least 30 minutes before swimming.

NOTE: Excessive rain, high temperatures or heavy bather loads may require more frequent additions of SoftSwim C Clarifier. Consult your SoftSwim dealer for additional details.

CLEARING CLOUDY WATER

Improperly cleaned filters are the primary cause of cloudy water in SoftSwim pools. Clean filter with SoftSwim Filter Cleaner following label directions. (Note: For best results, filter should be cleaned every 6 weeks.) Add SoftSwim C Clarifier at a rate of two gallons per 10,000 gallons of pool water. Use BioGuard SoftSwim Filter Aid to enhance clearing of cloudy water. If the condition persists, take a sample of your pool water to your BioGuard Dealer for further recommendations.

WINTERIZING

To winterize your pool, simply add SoftSwim Algicide A and SoftSwim B according to label directions and add 1 gallon of SoftSwim C Clarifier per 10,000 gallons.

Related Products

BioGuard SoftSwim A: part of the "A-B-C" system - protects against a broad spectrum of algae.

BioGuard SoftSwim A

The “A” in BioGuard SoftSwim A stands for “algaecide” and this additive protects against a broad spectrum of nasty gunk in non-chlorine pools.

BioGuard SoftSwim B: part of the "A-B-C" system - contains biguanide to kill bacteria and is gentle on eyes, hair, and skin.

BioGuard SoftSwim B

The “B” in BioGuard SoftSwim B stands for “biguanide” which sanitizes against bacteria while being soft on eyes, hair, and skin.

BioGuard SoftSwim Filter Cleaner: works with any filter type, removes filter-clogging particles specific to the SoftSwim program.

BioGuard SoftSwim Filter Cleaner

BioGuard SoftSwim Filter Cleaner is the most effective product available to prevent cloudy water and allow filters to operate at peak performance.