BIOGUARD SOFTSWIM 4-WAY TEST STRIPS
BioGuard SoftSwim 4-Way Test Strips
BioGuard Soft Swim Test Strips are designed to test pool water for the chemicals used in the Soft Swim program. These strips are easy to use and reveal results quickly and accurately. Pool experts recommend that Soft Swim Test Strips should be used weekly to ensure properly balanced water. This product works only with pools on the Soft Swim program.
Use With:
-
- In-Ground Pools
-
- Above Ground Pools
-
- Hot Tubs and Spas
How to Use BioGuard SoftSwim 4-Way Test Strips
Dip Strip into water for 1 second, remove.
Hold strip level for 30 seconds.
Compare total alkalinity, pH, and SoftSwim C (in that order) to the color chart.
Re-Dip the strip and rapidly move strip back and forth underwater for 30 seconds.
Compare bioguanide part to color chart.
Soft Swim B:
The SoftSwim B levels should register between 30- 50 ppm. If below add more SoftSwim B. Read SoftSwim B directions for proper dosing.
Total Alkalinity:
The Total Alkalinity level should register between 125 and 150 ppm. If Total Alkalinity is high add BioGuard Lo N Slo. If total alkalinity is low add BioGuard Balance Pak 100.
pH:
The pH levels should register between 7.2-7.8. If pH is high ad BioGuard Lo N Slo. If pH is low add BioGuard Balance Pak 200 according to label directions.
SoftSwim C:
SoftSwim C should register between 40-60 ppm. If below 40 ppm, add more SoftSwim C per label directions. If over 60 ppm, contact your BioGuard Dealer for guidance.
Related Products
BioGuard SoftSwim A
The “A” in BioGuard SoftSwim A stands for “algaecide” and this additive protects against a broad spectrum of nasty gunk in non-chlorine pools.
BioGuard SoftSwim B
The “B” in BioGuard SoftSwim B stands for “biguanide” which sanitizes against bacteria while being soft on eyes, hair, and skin.
BioGuard SoftSwim C
The “C” in BioGuard SoftSwim C stands for “clarifier” (and oxidizer) that removes contaminants that can cloud your pool water.