BIOGUARD MINERAL SPRINGS STAIN & SCALE
BioGuard Mineral Springs Stain & Scale
Applied annually, BioGuard Mineral Springs Stain and Scale prevents the build-up of nasty scale and stains on your chlorine generators, plumbing, and other equipment.
Use With:
-
- In-Ground Pools
-
- Above Ground Pools
Product Information
- Protects chlorine generator cell and pool equipment from scale
- Keeps chlorine generator working at optimum performance
- One of two products needed to convert an ordinary salt pool into a Mineral
- Springs pool
- Use annually
BioGuard Mineral Springs Stain & Scale
32 fl oz per 5,000 gallons of water per season.
Read the entire label and use strictly in accordance with precautionary statements and directions.
Before adding Mineral Springs Stain and Scale, bring a sample of the pool water or fill water to your local professional dealer to have the water tested and balanced to proper levels.
With filtration system running, apply one quart of this product per 5,000 gallons of pool water. Pour directly into the deep end of the pool.
Allow pool water to circulate for 24 hours after application.
Follow up application of Mineral Springs Stain and Scale is required once a season at start up.
Related Products
BioGuard Mineral Springs Beginnings
Step 1 of the Mineral Springs line, BioGuard Mineral Springs Beginnings creates a total mineral bathing environment and is a natural way to automatically sanitize pool water.
BioGuard Mineral Springs Renewal
Step 2 of the Mineral Springs line, BioGuard Mineral Springs Renewal replenishes lost mineral levels.
BioGuard SaltScapes pH Reducer
BioGuard SaltScapes pH Reducer helps to lower ph and total alkalinity levels in salt water pools to keep your sanitizer working at optimal levels.