BIOGUARD BALANCE PAK 200
BioGuard Balance Pak 200
BioGuard Balance Pak 200 raises pH in pool water. Keeping your pool’s pH level balanced helps prevent equipment corrosion, etching of plaster, and wrinkling of liners caused by low pH. It is also important to swimmer comfort as it prevents eye irritation due to low pH.
Use With:
-
- In-Ground Pools
-
- Above Ground Pools
Product Information
- 100% sodium carbonate, soda ash
- pH 11.6
- Improves swimmer comfort
- Protects pool equipment from corrosion due to improper pH
Product Resources
How to Adjust pH in a Pool
Learn how to raise and lower pH in your pool.
Read ItPool Chemistry Cheat Sheet
This article breaks down the complex water balancing act into simple steps so that you don’t miss a day of fun in your pool.
Read It
How to Use BioGuard Balance Pak 200
Read entire label and use strictly in accordance with directions and precautionary statements.
To raise pH, broadcast a maximum of one pound per 10,000 gallons of water directly into the deep end of the pool. Allow water to recirculate two to three hours, recheck pH, and repeat treatment if necessary. The BioGuard Multi- Test 1200V kit incorporates an alkali demand test which calculates the total amount of this product needed to bring pH into the proper range. When using the Multi-Test 1200V, follow maximum one-time treatment recommendations and application techniques described in the above paragraph. If pool capacity is unknown, retest pH prior to further additions.
Related Products
BioGuard Balance Pak 100
BioGuard Balance Pak 100 is used to raise total alkalinity. Maintaining proper total alkalinity prevents pH from bouncing due to rain, bather load, and other chemical applications.
BioGuard Balance Pak 300
BioGuard Balance Pak 300 is a calcium hardness increaser.
BioGuard Instant Stabilizer 100
BioGuard Instant Stabilizer 100 is a quick dissolving formula that prevents the flood of free chlorine due to sunlight.