BioGuard Oxysheen
BioGuard Oxysheen
BioGuard Oxysheen is a non-chlorine pool shock treatment. It will destroy contaminants such as perspiration, sun tan oils, and other impurities that can affect swimmer comfort. By destroying organic waste, this product can lower your sanitizer consumption, as well as brighten and clarify your pool water. This product dissolves rapidly and completely, so swimming can resume just 15 minutes after application. No relation to Martin, Charlie, or Emilio.
Use With:
-
- In-Ground Pools
-
- Above Ground Pools
Product Information
- 42.8% potassium peroxymonopersulfate
- 4.3% active oxygen
- pH 2.3
- Clears cloudy water
- Destroys contaminants and odors
- Shocks non-living matter
- Contains no bromine or chlorine
- Fast dissolving/non bleaching
Product Resources
- How to Use the BioGuard Saltscapes Program
- SaltScapes: Salt Care for Your In-Ground Pool (PDF)
Initial set up and maintenance instructions for using BioGuard’s SaltScapes program. - Everything to Know about Pool Shocking
Answers questions regarding what types of shocks there are, when to use them and how to use them.
How to Use BioGuard Oxysheen
Read entire label and use strictly in accordance with precautionary statements and directions.
FOR CHLORINE OR BROMINE POOLS
INITIAL TREATMENT OR TO CLEAR CLOUDY WATER
Use this product at the rate of two pounds (2 lb) per 10,000 gallons of pool water.
REGULAR TREATMENT
Use at the rate of one pound (1 lb) per 10,000 gallons every week. When the water temperature is above 86°F (30°C) or when the pool is subjected to heavy use, the treatment (1 lb per 10,000 gallons) should be made twice weekly.
HOW TO APPLY
Broadcast the required amount of this product directly into the deep end of the pool with the filtration system running.
Apply in the morning or evening when no bathers are in the water. Swimming or bathing may be resumed in 15 minutes.
Maintain pH in the range of 7.2-7.6, total alkalinity in the range of 125-150 ppm or 80-150 ppm for Mineral Springs, and calcium hardness in the range of 175-225 ppm for vinyl and fiberglass or 200-275 ppm for plaster.
NOTE: This product will produce false high total chlorine readings for 48 to 72 hours.
FOR SOFTSWIM® POOLS
To help retain a SoftSwim C residual, use at a rate of two and one-half pounds (2 ½ lb) per 10,000 gallons of pool water. Apply half of this dosage in the skimmer and broadcast half of this dosage directly into the deep end of the pool with the filtration system running. See your BioGuard dealer if you have any questions.
Related Products
BioGuard SaltScapes Algae Remover
BioGuard SaltScapes Algae Remover is a highly effective, non-staining algaecide that kills algae in swimming pools.
BioGuard SaltScapes SunShield Stabilizer
BioGuard SaltScapes SunShield Stabilizer protects the chlorine that your chlorine generator has created from being destroyed by the sunlight.
BioGuard SaltScapes Scale Defender
BioGuard SaltScapes Scale Defender is designed to bind to calcium in your water, thus preventing the calcium from sticking together and forming on your pool, pool equipment and salt cell.